+91-9960999900
sales@smsystems.co.in
Products  Accessories
Products

Accessories

Accessories are important part of each instrument. Standard set is normally part of the instrument itself. Optional accessories set is described in this section.

A 1143 Euro Z 290 A Accessories

The A 1143 Euro Z 290 A is a professional portable high current impedance tester. It performs high precision line and high precision fault loop impedance measurements in environments up to CAT IV / 310 V.

MD 9016 Digital multimeter Accessories

The digital multimeter MD 9016 is a perfect combination of size, Innovative functions and built-in PC communication. It is capable to detect and diagnose most electrical and electrotechnical problems. Display with large easy-to-read figures and one-handed operation make MD 9016 an extremely easy-to-use. This compact instrument combines a high level of functionality and small size and portability.

MD 9020 Digital multimeter Accessories

The MD 9020 is a high-quality digital multimeter, designed for everydayuse in the laboratory and for maintenance and repair in the industrialsector.

MD 9030 Digital multimeter Accessories

The TRMS digital multimeter MD 9030 has been designed for use both inthe laboratory and in the harsh industrial maintenance and repairsector.

MD 9040 Digital multimeter Accessories

CAT IV/1000 V overvoltage category and TRMS measurement of AC currentand voltage are key features of the MD 9040. That’s why it isparticularly suitable for measurements on power supply sources and themost demanding applications in the industrial sector. Its highaccuracy, etc.

MD 9050 Digital multimeter Accessories

The MD 9050 ranks among the best multimeters on the market. High resolution and accuracy, 2-line LCD display, fast data acquisitionand transfer (via optical interface), CAT IV/1000 V, TRMS current andvoltage measurement, non-contact voltage detector, conductancemeasurement, etc.

MD 9060 Digital multimeter Accessories

The MD 9060 ranks among the most accurate multimeters with a large bandwidth and very high resolution. Metrel MD 9060 is equipped with a built-in VFD feature that makes the instrument capable of measuring the true values in accordance with frequency, large 2-line 500.000 counts LCD display, fast data acquisition and transfer (via optical interface), CAT IV / 1000 V, TRMS current and voltage measurement, conductance measurement and fast one-handed operation. MD 9060 has a wide range of extra features, including data hold, memory, min / max, average, differential, peak, peak / peak with extra fast 1ms response time, auto power off, frequency filter, reset and relative function. The MD 9060 is the ideal choice for demanding measurement tasks in industry, in the laboratories and in everyday repair and maintenance practice.

MD 9235 Power clamp meter Accessories

The MD 9235 is a Slim-Jaw current clamp meter with ability to measure 3-Phase Unbalanced-Load + kWHr recording. The MD 9235 enables TRMS AC current measurement up to 600 A, single and 3-phase power analysis, total power factor and resistance measurement. Display with large easy-to-read figures and one-handed operation make MD 9235 an extremely easy-to-use. This compact instrument combines a high level of functionality, small size and portability. All built-in features make MD 9235 a perfect tool for advanced Power applications.

MD 9240 Power clamp meter Accessories

The MD 9240 is a high-quality and extremely easy to handle power clampmeter. The current clamp enables TRMS AC current measurement up to 1000A, single-phase power analysis, DC, AC voltage measurement, temperaturemeasurement and more.

MD 9240 Power clamp meter Accessories

The MD 9240 is a high-quality and extremely easy to handle power clampmeter. The current clamp enables TRMS AC current measurement up to 1000A, single-phase power analysis, DC, AC voltage measurement, temperaturemeasurement and more.

MD 9250 Power clamp meter Accessories

The MD 9250 is the first Clamp Meter that meets overvoltage category CAT IV 1000 V. MD 9250 is a high quality clamp meter specially designed for single-hand operation, built-in measuring functions; TRMS AC/DC (current, voltage), capacitance, temperature and full range resistance makes this instrument an ideal tool for the most demanding applications in the industrial sector. The large jaws capacity of (max. 55 mm) in diameter allows AC/DC current measurements up to 2000 A. High resolution and accuracy, 2-line LCD display fast data acquisition and transfer (via optical interface), non-contact voltage detection, and auto-check function are highlights of the instrument.

MI 2014 Cable Scanner Accessories

Cable Scanner is easy to use LAN tester with wide variety of functions for fault finding and troubleshooting on IT cabling connections.

MI 2016 Multi LAN 350 Accessories

High performance, multifunction test instrument for LAN cabling verification.

MI 2077 TeraOhm 5 kV Accessories

Advanced, digital HV measuring instrument with maximum test voltage up to 5000 V DC and resistance measuring range up to 5 TΩ.

MI 2086 Eurotest 61557 Accessories

Advanced, multifunctional digital measuring instrument for low voltage electrical installation safety testing in accordance with IEC / EN 61557. Best selling installation tester in Europe!

MI 2088 Earth Insulation Accessories

Multifunction, digital measuring instrument for testing of earthing and lighting protection systems, PE conductor continuity testing and DC insulation resistance measurement on low voltage electrical installations in accordance with EN 61557.

MI 2093 Line Tracer Accessories

Field proven instrument for under-wall low voltage installation tracing, fuse finding, short-circuit spot determination and metal installation tracing. Accurate fuse locating

MI 2130 VoltScanner Accessories

High performance, digital, one phase voltage recorder.

MI 2230 VAFMeter Accessories

MI 2230 VAFMeter is handheld multifunction instrument which can accurately measure voltage, current, power, harmonic distortion and phase angles in single, two and three phase systems.

MI 2392 PowerQ Plus Accessories

PowerQ Plus is a genuine, portable 3-phase power quality analyser which favorably competes with higher priced instruments and can be easily implemented in a variety of different situations.

MI 2492 PowerQ Accessories

Power Q is a genuine, portable 3-phase power quality analyser which favorably competes with higher priced instruments and can be easily implemented in a variety of different situations.

MI 2592 PowerQ4 Accessories

MI 2592 PowerQ4 is a handheld, simple to use, portable power quality analyser with four current and four voltage measuring channels. Integrated in rugged housing and packed with powerful functions it can be effectively used for monitoring, troubleshooting and analysing of power quality conditions in power distribution networks either in industry or utilities. 

MI 2792 PowerQ4 Plus Accessories

The MI 2792 PowerQ4 Plus is top of the range power quality analyser. With its 4 current and 4 voltage channels it is suitable for locating, predicting and troubleshooting of problems in three and in single phase power distribution systems. All 4 current channels have the ability to automatically recognize clamps whose range can be set on the instrument. 

MI 2792A PowerQ4 Plus Accessories

The MI 2792A PowerQ4 Plus is top of the range power quality analyser. With its 4 current and 4 voltage channels it is suitable for locating, predicting and troubleshooting of problems in three and in single phase power distribution systems. All 4 current channels have the ability to automatically recognize clamps whose range can be set on the instrument. Rugged design makes it appropriate for field use. It can operate up to 15 hours on a single battery charge. Pa-rameters of the instrument can be set directly on the instrument, via the PowerView software or remotely true the optional GPRS modem connection. It is compliant with power quality standard IEC 61000-4-30 Class A, and it has a predefined recorder profile for EN 50160 survey.

MI 2892 Power Master Accessories

The NEW MI 2892 Power Master is a hand-held three phase power quality ana­lyser with a large easy-to-read graphical colour display enabling the user to detect harmonics, phasors and waveforms anomalies in the installation simply by con­necting the device. The instrument is designed for a long term recording as well as for troubleshooting power quality problems in three-phase and single-phase power distribution systems. The handy Quick Set buttons makes the instrument more user friendly and are allowing faster data overview for troubleshooting. Advanced PC SW package PowerView3 enables detailed analysis of recorded data, direct reading from the microSD memory card, analysis of long term records and automatic creation of professional test report.

MI 3100 S Eurotest EASI Accessories

MI 3100 s EurotestEASI is a fast, accurate and easy to use multifunctional measuring instrument which performs a basic set of installation safety tests according to IEC/EN 61557. Besides, the MI 3100 s EurotestEASI enables on-line voltage monitoring, phase sequence testing and earth resistance measurement. EurotestEASI is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results.

MI 3100 SE Eurotest EASI Accessories

MI 3100 SE EurotestEASI is a fast, accurate and easy to use multifunctional measuring instrument which performs a complete set of installation safety tests according to IEC/EN 61557. Besides, the MI 3100 SE EurotestEASI enables on-line voltage monitoring, phase sequence testing and earth resistance measurement. EurotestEASI is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

MI 3101 Eurotest AT Accessories

EurotestAT is automated robust and lightweight electrical installation tester. Experts from the field, maintenance people, inspectors and specialists help us ascend and descend the slopes with design and efficiency. The designing concepts of practicality and easiness of use reflect in the new feature named AUTO SEQUENCE ®, which the EurotestAT is based on.

MI 3102 BT Eurotest XE Accessories

MI 3102 BT EurotestXE is a multifunctional measuring instrument which performs a complete set of installation safety tests according to IEC/EN 61557. It supports AUTO SEQUENCE ® testing of the TN, TT and IT earthing systems. ISFL measurements and the IMD tests can be performed. Besides, the MI 3102 BT EurotestXE enables on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement. EurotestXE is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

MI 3102H BT Eurotest XE Accessories

MI 3102H BT EurotestXE 2,5 kV is a multifunctional measuring instrument which apart from all the necessary functions for complete installation safety testing according to IEC/EN 61557 performs insulation resistance measurement with the test voltage up to 2,5 kV (measuring range is up to 20 GΩ) and enables diagnostic test by PI and DAR indexes calculation. Besides, the MI 3102H BT EurotestXE 2,5 kV enables on-line voltage monitoring, phase sequence testing, earth resistance measurement, illuminance measurement and TRMS current measurement. EurotestXE 2,5 kV is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

MI 3105 Eurotest XA Accessories

The fifth generation of Metrel’s multifunction ele. installation testers brought know-how in the testing procedures to reality. Because of the need to be efficient, faster and competitive but still responsible and concentrated on safety, all the technical content and innovations under AUTO SEQUENCE ®, rotate around taking care about testing procedures itself.

MI 3108 Eurotest PV Accessories

MI 3108 EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic, Calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.

MI 3108 Eurotest PV Accessories

MI 3108 EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic, Calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.

MI 3109 Eurotest PV Lite Accessories

MI 3109 EurotestPV Lite is a photovoltaic (PV) tester. It performs all necessary tests required on photovoltaic installations. This includes all of the tests as required by EN62446, but also includes I - U characteristic measurements, calculation to STC values and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.



MI 3109 Eurotest PV Lite Accessories

MI 3109 EurotestPV Lite is a photovoltaic (PV) tester. It performs all necessary tests required on photovoltaic installations. This includes all of the tests as required by EN62446, but also includes I - U characteristic measurements, calculation to STC values and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.

MI 3110 Eurotest IM Accessories

The MI 3110 EurotestIM is a perfect tool for testing permanent Integrated or mobile IT Earthing Systems with Low Voltage Electrical Installation’s Power Supply from Generator or Transformer.

MI 3121 SMARTEC Insulation / Continuity Accessories

MI 3121 SMARTEC Insulation / Continuity for verification, maintenance and periodic testing of electrical installations; PE conductors, main and supplementary PE connections, troubleshooting, insulation resistance, observation of insulation trends and insulation of control, signal, telecom wiring (50 V, 100 V). Suitable for testing on CAT IV installations.

MI 3121H SMARTEC 2,5 kV Insulation / Continuity Accessories

The MI 3121H Smartec 2,5 kV Insulation / Continuity is the portable measuring instrument for complete diagnostic testing of insulation and continuity measurements.

MI 3122 SMARTEC Z Line-Loop / RCD Accessories

MI 3122 SMARTEC Z Line-Loop / RCD for verification, maintenance and periodic testing of electrical installations; evaluation of protective measures in LV-installations, troubleshooting on live installations. Suitable for testing on CAT IV installations.

MI 3123 SMARTEC Earth / Clamp Accessories

MI 3123 SMARTEC Earth / Clamp for testing earthing resistance, main earthing of objects, resistance of individual earthing rods in large systems, lightning systems, determination of soil resistivity, designing of earthing systems. Suitable for testing on CAT IV installations.

MI 3125 BT Eurotest COMBO Accessories

MI 3125 BT EurotestCOMBO is the ideal instrument for engineers who perform high volume testing or work regularly on TT and TN systems. Containing all necessary tests for installation safety testing, MI 3125 BT offers the brand new ability to test B-type (DC sensitive) RCDs. EurotestCOMBO contains integrated characteristics of fuses and RCDs (including B type) for the evaluation of line / loop impedance results. The bright graphic display with backlight ensures that results, indications, measurement parameters and messages are clear, visible and easy to read. The red and green LEDs on either side of the display provide a clear PASS / FAIL evaluation of test results. Each test has its own individual help screen describing how to connect the instrument into the installation and how to perform a measurement. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software, included in the standard set, to the computer for evaluation and report generation after testing.

MI 3125 Eurotest COMBO Accessories

The MI 3125 is a multifunctional installation safety tester which is distinguished by lightweight design and usability. Integrated characteristics of fuses and RCDs, help screens, red and green LEDs for PASS / FAIL evaluation of test results online voltage monitor make the MI 3125 ideally suited for fast and easy testing of electrical installations.

MI 3200 TeraOhm 10 kV Accessories

TeraOhm 10 kV is professional insulation tester, which allows measuring and testing high voltage equipment.

MI 3201 TeraOhm 5 kV Plus Accessories

MI 3201 TeraOhm 5 kV insulation tester is a portable instrument intended to measure insulation resistance through the use of high voltage DC test voltages up to 5 kV. The large LCD screen allows real-time R(t) graphs to be displayed.

MI 3202 GigaOhm 5 kV Accessories

MI 3202 GigaOhm 5 kV provides a quick and accurate reading of insulation resistance. The large segment LCD screen with backlight offers easy reading of results. The analogue/digital display with analogue graph has a range of up to 1 TΩ for insulation resistance and 600 V for voltage measurements.

MI 3210 TeraOhmXA 10kV Accessories

MI 3210 TeraOhm XA 10kV is a portable, battery or mains powered test instrument with excellent IP protection (IP65), intended for diagnosing of Insulation Resistance by using high DC test voltages of up to 10 kV. Because of its robustness (CAT IV protection) and high immunity to radiated RF fields it is best suited for industrial environment.

MI 3242 MicroOhm 2A Accessories

MI 3242 MicroOhm 2A is a portable low resistance ohmmeter used to measure low resistances of switches, relays, connectors, bus bars, power distribution cable joints, motor & generator winding, power transformers, power inductors, rail track joints, wire and cable resistance, welding joints for industrial application, etc., with test current up to 2A

MI 3250 MicroOhm 10A Accessories

MicroOhm MI 3250 is portable low resistance ohmmeter for measuring low resistances of breakers and switches, busbars, cable joints, small to medium sized transformer and motor windings for industrial application, etc., with test current up to 10 A.

MI 3252 MicroOhm 100A Accessories

MI 3252 MicroOhm 100A is a portable low resistance ohmmeter used to measure low contact resistances of breakers and switches, busbars using test current from 100 mA to 100 A.

MI 3295 Step Contact Voltage Measuring System Accessories

MI 3295 Step Contact Voltage Measuring System is a voltage measuring system for testing and verification of protective earthing of power stations, substations and other power systems.

MI 3304 BetaGT Plus Accessories

The innovative MI 3304 BetaGT Plus is a highclass instrument intended for electrical safety testing of a wide range of portable electrical appliances, IT equipment, IEC cords and portable RCDs according to IEC/EN and VDE standards. 

MI 3305 OmegaGT Plus Accessories

The innovative MI 3305 OmegaGT Plus is a highclass instrument intended for electrical safety testing of a wide range of portable electrical appliances, IT equipment, IEC cords and portable RCDs according to IEC/EN and VDE standards.

MI 3309 BT DeltaGT Accessories

The new MI 3309 BT DeltaGT is both battery and mains powered multifunctional instrument intended to perform measurements for testing the electrical safety of portable electrical equipment.

MI 3310 25A SigmaGT Accessories

The multifunctional portable test instrument SigmaGT is intended to perform all measurements for testing the electrical safety of portable electrical equipment. The operation of the unit is clear and simple, the operator does not need any special training to operate the instrument.

MI 3310 SigmaGT Accessories

The multifunctional portable test instrument SigmaGT is intended to perform all measurements for testing the electrical safety of portable electrical equipment. The operation of the unit is clear and simple, the operator does not need any special training to operate the instrument.

MI 3311 GammaGT Accessories

The new MI 3311 GammaGT is a battery powered multifunctional instrument intended to perform measurements for testing the electrical safety of portable electrical equipment. 

MI 6201 Multinorm Accessories

Universal all-in-one instrument for measurement of air temperature, air velocity, relative humidity, illluminance, luminance and the Class 1 (Pro Set) or Class 2 (Euro Set and Standard Set) sound analyses.

MI 6301 Fons Accessories

Completely digitalised Class 1 (Pro Set) or Class 2 (Euro Set) sound level meter with two independent measuring channels compliant with IEC 61672 standard. FonS is also a real-time octave and one third octave frequency analyser compliant with IEC 61260 standard.

MI 6401 Poly Accessories

Measurement functions for air temperature, air velocity, relative humidity, illluminance and luminance are all found within one device.